top of page

Tool Rental & Shop Equipment

How Does It Work?

If your rent a bay you get the tools included, it is that simple.

What Are The Rules?

​Return all tools clean, easy!

What Do I Get With Bay Rentals?

Basic Toolbox includes:

  • Hand Tools

  • Socket Wrench Set with Handles and Extensions

  • Breaker Bar

  • Wrenches

  • Screwdrivers

  • Allen/Hex Bit Sockets

  • Hammer set

  • Pry Bar Set

  • Multimeter

  • Plastic/Rubber Hammer or Mallet

  • Needlenose Pliers

  • Plier Set

  • Adjustable (Crescent) Wrench

​

Access to shop equipment such as:

  • Fluid Disposal

  • Air Compressor System

  • Air Filtration System

  • Air Powered Tools

  • Jigs and Work Stands

  • Strut Compressor

  • Parts Washer

  • Battery Charger/Engine Start

  • Transmission Jack

  • Engine Stand

  • Engine Hoist

  • Shop Press

  • Bench Vice

  • Bench Grinder

  • Tube Bender

  • Media Blaster

  • Shop Bench

  • Front/Rear Stands

  • Rolling Stool

  • Work Lamp with Clamp

  • Funnels

  • Ruggedized laptops to use at your workstation

  • Wi-Fi

​

**Please Note: This list is not all inclusive. If you don’t see what you are looking for, CONTACT US to see if we have it!**

What If I Need A Specialty Tool?

We have specialty tools for small additional charges so we can keep them in good working condition.

  • Specialty Tools Black Tag

  • Impact Wrench/Driver

  • Cordless Impact Driver

  • Cordless Drill

  • Portable Air Compressor

  • Oil Filter Pliers

  • Breaker Bar

  • Torque Wrench

  • Tire Pressure Gauge

  • Magnetic Dish

  • Snap Ring Pliers

  • Grease Gun

  • Saws-All

  • Feeler Gauge

  • Wire Striper / Crimper

  • Tap & Die Set

  • Ball Joint Press Kit

  • Plastic Fastener Removal Tool

  • Spring Compressor

  • Power Steering Puller

  • Rethreading Kit

  • 3 Jaw Puller

  • Damaged Bolt / Nut Remover

  • Damaged Screw Remover

  • Black Tags (Hand tools including an impact) $6 per hour

​

Specialty Tools Red Tag

  • Air Sanders

  • Cut off Saw

  • Angle Grinder

​

Red Tags (Tools that use consumables, maintenance or calibration) $12 per hour


In addition, we have some consumables available for purchase

  • WD-40

  • PB-Blaster

  • Nitrile Gloves

  • Shop Rags

  • Zip-ties

  • Loctite Threadlocker

  • Spare Fuses (general vehicle)

  • Chain Lube

  • Assorted Nylon and Wire Brushes

  • Grunge Brush

  • Utility Knife

  • Vacuum line

  • Bulbs

  • Teflon Tape

Use Your Mechanical Knowledge And Skills Or Learn New Ones.

Advisors are available, upon request, to help with guidance but the project is yours.

bottom of page